![Favero Electronics 772-01 User Manual Download Page 12](http://html.mh-extra.com/html/favero-electronics/772-01/772-01_user-manual_546727012.webp)
11
FAVERO Electronics
- 0259-0902A Assioma user manual _Rev21 - EN-IT-DE
ENGLISH
If you use
assioma
for 15 hours a week, it is sufficient to charge it once every 3 weeks.
The battery can also be charged when it is only partially discharged: this will further
increase its life span.
If the product is not used for long periods of time, charge the battery anyway at
least every 3 months in order to avoid the risk of irretrievably damaging the
product.
When the battery of a pedal runs low, the bike computer will display a warning. The
remaining battery life, after a low battery warning, will be of about 8 hours.
To charge the batteries, follow the procedure below for each sensor:
• Connect the battery charger supplied to an electrical socket.
• Connect the USB cable supplied to the battery charger.
• Insert the micro USB connector into the magnetic connector (see the picture).
• If the sensor contacts are wet or dirty, dry or clean them with a dry cloth.
• Connect the magnetic connector to the pedal as indicated in the picture: the LEDs
switch on and remain switched on during the entire recharging. Once recharging has
been completed, the LEDS will blink every 0.5 seconds.
Recharging a completely discharged battery takes about 6 hours.
Recharge at a temperature ranging between 5°C and 40°C. Beyond this range,
recharging is blocked to protect battery functionality.
Micro USB connector
Magnetic charging
connector