5
1 Important Information
This technical manual describes the handling and technical features of the following FAULHABER
equipment:
MCBL 3002 / 03 / 06
The MCBL is an external Motion Controller for brushless DC servomotors with analog Hall sensors,
which can be operated without additional encoders.
MCDC 3002 / 03 / 06
The MCDC is an external Motion Controller that is designed for the entire range of FAULHABER DC
micro motors.
MCLM 3002 / 03 / 06
The MCLM is an external Motion Controller for linear DC servomotors with analog Hall sensors,
which can be operated without additional encoders.
Before using the controller, please read the entire technical manual and at least the quick start
chapter or the chapter on commissioning in the communication and function manual.
Keep these manuals in a safe place for later use.
The information given in this technical manual refers to the standard versions of the respective
equipment. Please refer to any additional information sheet provided in the event of differences in
information due to a customer-specific modification.
1.1 Symbols used in this technical manual
WARNING!
Warning!
This pictogram with the wording "Warning!" indicates an imminent danger which can result in
physical injuries.
f
This arrow points out the appropriate action to take to prevent the imminent danger.
CAUTION!
Caution!
This pictogram with the wording "Caution!" indicates an imminent danger which can result in slight
physical injuries or material damage.
f
This arrow points out the appropriate precautions.
REGULATION! Regulations, guidelines and directives
This pictogram with the wording "Regulation" indicates a statutory regulation, guideline or directive
which must be observed in the respective context of the text.
NOTE
Note
This "Note" pictogram provides tips and recommendations for use and handling of the component.