18.1
18.2
18.3
18.4
17
Start-up Procedure
Procedure
- Connect the servo amplifier
- Power the servo amplifier
- Adjust offset
References
10. Connection diagram
18.4 Offset adjustment
Procedure
- Connect the servo amplifier
- Adjust offset
- Connect SE4P module to encoder
- Select R7, R1, C1 and C2
- Set current limit
References
16. Connection diagram
18.4 Offset adjustment
18.6 Selection of R7 for servo amplifier
BLD 5603/06-SE4P
7.3 and 18.7 Current limiter
References
13. Connection diagram
18.4 Offset adjustment
18.5 Selection of R7
for servo amplifier BLD 5603/06-SH4P
7.3 and 18.7 Current limiter
Procedure
- Connect the servo amplifier
- Adjust offset
- Select R7, R1, C1 and C2
- Set current limit
Offset adjustment
The offset is adjusted changing potentiometer
Pot.
,
(the position is indicated in
chapters
9,12
and
15 "Dimensional drawing"
).
Important:
This setting is made by Minimotor (potentiometer Pot.
sealed), hence
no other intervention is required.
Specifications subject to change without notice
Servo Amplifiers BLD 5603/06-CC4P for current control
Servo Amplifiers BLD 5603/06-SH4P for speed control
Servo Amplifiers BLD 5603/06-SE4P for speed control with encoder
Summary of Contents for BLD 5606 Series
Page 30: ...28 Notes...
Page 31: ...29 Notes...
