54
Chapter 5 Sending Emails, Email to SMS
In terms of the maintenance immediacy, the FBs-CBEH series expansion board
provides the Email sending function. When special situations occurred on the
workstation, an Email can be sent to notify the maintenance personnel by activating
the Email send command code. In addition, through telecommunication companies
that provide Email to SMS sending functions, real-time notifications can be achieved
using the Email to SMS function. Before sending Emails, a tool “Email Editor” can be
used to setup the messages to be sent and the email account information required to
send the email. This editor can be opened from “Easy Web Designer” -> “Tools”.
The figure below is the Email Editor window; detailed descriptions of its fields are as
follows:
FROM
: Just like ordinary Emails, fill in the Email’s sender.
Working Mode
: In response to different application methods, the Email Editor
provides two sending method settings: “Email” and “Email to SMS”.
TO
: Just like ordinary Emails, fill in the address of the recipient to receive this
Email; multiple recipients may be entered, such as: [email protected];
[email protected]. (Note: When the operation mode is the “Email to SMS” mode,
this field is the Email address of each service provider.)
Msg. Encoded
: Set according to the operation mode; when in “Email” mode, the
coding method is fixed to “UNICODE” and “UTF-8”. And in “Email to SMS”
mode, because SMS does not support Unicode, therefore users must pay special
attention to the setting. If Traditional Chinese SMS must be sent, the message
coding should be set as “ANSI” and the coding character set should be “big5”,
this way garbled won’t be generated when the SMS is received.
Summary of Contents for CBEH
Page 1: ...Ethernet Communication Board CBEH CBEH 0A CBEH 2A ...
Page 44: ...44 ...
