FATEK CBEH Manual Download Page 43

Page: 43 / 71



Button

Function Description

Used to display and control the on/off state of a contact point.

Sample Screenshot

Setting Method

Content Type:

Select “Button”.

Title String

: The title description of this button, such as the text displayed in the

Sample Screenshot “Example-Button M0 Switch”.

Reference No.

: The reference number of contact point to be monitoring. The

allowable reference are X, Y, M, S type.

Button Type:

There are following buttons can be selected

“Toggle” – Change state for each button press.

“Set On” – Change to on when button press.

“Set Off” – Change to off when button press.

“Momentary On” - Change to on whenever the button is depressed, change to

off when button is released.

“Momentary Off” - Change to on whenever the button is depressed, change to

off when button is released.

Button Caption

: “On State” - the text shown on the button when the contact

point is on state. “Off Status Text” - the text shown on the button when the
contact point is off state

Status Caption:

“On State” the text shown on the value field when the contact

point is on state. “Off State” - the text shown on the value field when the
contact point is off state.

Summary of Contents for CBEH








































































Search results

Summary of Contents for CBEH

Reviews:

Related manuals for CBEH

Brands by name

Popular brands

FATEK CBEH, Manual

Search results

Summary of Contents for CBEH

Reviews:

Related manuals for CBEH

Brands by name

Popular brands