Fastwel CPC309 User Manual Download Page 3

Page: 3 / 70

CPC309 Intel Atom D510-based SBC

Specification

TABLE OF CONTENTS

TRADEMARKS

OWNERSHIP RIGHTS

COPYRIGHT

TRANSPORTATION, UNPACKING AND STORAGE

……………………………………………………………...…..8

Transportation………………………………………………………………………………………………………..…. 8

Unpacking

………………………………………………………………………………………………………..……… 8

Storage

……………………………………………………………………………………………………………..……. 8

MANUFACTURER’S WARRANTY

………………………………………………………………………………………..9

Warranty Liability……………………………………………………………………………………………………..…9

Liability Limitation Right………………………………………………………………………………………………..9

Warranty Period…………………………………………………………………………………………………..….….9

Limitation of warranty liabilities…………………………………………………………………………….………….9

Returning a product for repair…………………………………………………………………………………….…...9

1. INTRODUCTION……………………………………………………………………………………………………….

1.1. Purpose……………………………………………………………………………………………….……..….…10

1.2. Versions, ordering information………………………………………………………………………………….10

1.2.1. Versions, ordering information………………………………………………………………………………10

1.2.2. Delivery checklist……………………………………………………………………………………………...12

1.3.

Additional accessories…………..………………………………………………….…………………….………12

2. TECHNICAL CHARACTERISTICS…………………………………………………………………………………..

2.1. Technical structure of the mdoule

………………………………………………………………………...…….

2.2. Module Power Supply

………….....……………………………………………………………………………...14

2.3 Operating Conditions

……….……………………………………………….…………………………………..14

2.4 Mechanical Characteristics

…….……………………………………………………………………………….15

2.5 Weight and Size Characteristics

…………………………………………………………………………….…..15

2.6. MTBF……………………………………………………………………………………………….…………...…16

3. MODULE STRUCTURE AND FUNCTIONING.

…………………………………………………….…………….…17

3.1 Block Diagram of the Module

…...……………………………………………………………….…………..…17

3.2 Location of Module’s Principal Components ..…………………………………………………..…………... 18

3.3 Features of functional parts

……………………………………………………………………………………...20

3.4 Interfaces and module connector

…………………………………………………………………………….…21

3.4.1 StackPC-PCI connectors

……………………………………………………………………………………...21

3.4.2 Graphics controller

…………………………………………………………………………………………….25

3.4.3 Audio interface

……………………………………………………………………………………………….…27

3.4.4 Serial interfaces

………………………………………………………………………………………………...28

3.4.5 USB Interfaces

………………………………………………………………………………………………….29

3.4.6 Gigabit Ethernet interface

……………………………………………………………………………………..30

3.4.7 SerialATA Interface

…………………………………………………………………………………………….30

3.4.8 CompactFlash Connector

……………………………………………………………………………………..30

3.4.9 PS/2 keyboard/mouse interface………………………………………………………………………………32

3.4.10 Power supply connector………………………………………………………………………………………32

3.4.11 Digital I/O port………………………………………………………………………………………………….33

3.4.12 System reset connector………………………………………………………………………………………35

3.5 LEDs…………………………………………………………………………………………………………………35

Summary of Contents for CPC309







































































Search results

Summary of Contents for CPC309

Reviews:

Fastwel CPC309, User Manual, Page: 3 / 70

Search results

Summary of Contents for CPC309

Reviews: