CPC309 Intel Atom D510-based SBC
Specification
More detailed information on TFT panel supply voltage is given in subsection 5.2 Selection of
TFT panel power supply.
If contacts 1-2 are closed
– voltage of +3.3 V is carried to the digital panel.
If contacts 2-3 are closed
– voltage of +5 V is carried.
Attention!
Pay close attention when you set power supply of the TFT panel! Improperly set supply voltage
may cause the panel to break down. In order to clarify the exact power supply voltage of the
TFT panel, please refer to the information provided by the panel manufacturer, or to the dealer
which sold this panel.
3.4.3 Audio interface
The module is equipped with two Audio-connectors designed for wire crimp (support is
implemented using Audio Codec HD Audio):
-
with line input and line output signals (5-pin connector with a pitch of 2 mm XP19);
-
with microphone input signals (2-pin connector with a pitch of 2 mm XP20);
Fig. 3-8: XP19 Audio connector
Fig. 3-9: XP 20 Audio connector
The below table demonstrates purposes of Audio connector contacts.