3-6
Initial Settings for IO-Link Communication
3-2
Initial Settings for IO-Link
Communication
This section describes the operations required for this product to perform the IO-Link communication with
IO-Link devices.
7KHLQLWLDOVHWWLQJVUHTXLUHGIRU¿HOGQHWZRUNFRPPXQLFDWLRQGLႇHUGHSHQGLQJRQWKH¿HOGQHWZRUNW\SH5HIHU
to the manual for Product Communication Edition
DFFRUGLQJWRWKH¿HOGQHWZRUNW\SH
3-2-1 Checking I/O Mode Assignments
7KH,2VHWWLQJDVVLJQPHQWVWDWXVFDQEHFKHFNHGRQWKHIURQWGLVSOD\RIWKLVSURGXFW
$IWHUVHOHFWLQJWKHODQJXDJHLQWKHVWDUWXSVFUHHQRISURFHVVGDWDGLVSOD\HGZKHQWXUQLQJRQWKHSRZHU
SUHVVWKH>(17(5@NH\IRUDEDWFKGLVSOD\RIWKH,2DVVLJQPHQWVWDWXVDVEHORZ
Example:
I: IO -Link Mode setting (IO-Link device is not connected while blinking)
n: NPN input mode setting
N: NPN output mode setting
- : Not used
Refer to “Chapter 5 Front Panel Operations
´IRUGHWDLOV
3-2-2
7UDQVIHURID3UR¿OHRI7KLUGSDUW\
IO-Link Device
7RFRQQHFWDWKLUGSDUW\,2/LQNGHYLFHFRQYHUWDQGWUDQVIHULWV,2''¿OHWKDWGHVFULEHVWKHGHYLFHWRWKLV
product. This enables the numbers and names of parameters described in an IODD file of each IO-Link
GHYLFHWREHGLVSOD\HGRQWKHIURQWGLVSOD\RIWKLVSURGXFW
7RXVHDQ,2/LQNGHYLFHIURP237(;)$DQGDWKLUGSDUW,2/LQNGHYLFHWKDWVXSSRUWV,2/LQN2EMHFW3UR¿OH
3OXV23WKHVHSURFHGXUHVDUHQRWQHFHVVDU\DV,2''GDWDLVFRQWDLQHGLQWKRVHSURGXFWV
Use the UR Master Manager to convert
,2''¿OHVLQ;0/RIFRQQHFWHG,2/LQNGHYLFHVLQWRDVLQJOH,2''
¿OHLQELQDU\¿OH$IWHUFRQYHUVLRQWUDQVIHUWKH¿OHWRWKLVSURGXFWYLD¿HOGQHWZRUN
8SWR¿OHVRI,2''FDQEHFRQYHUWHGLQWRDVLQJOH¿OHWREHWUDQVIHUHGWRWKLVSURGXFW
This can be made through the following procedures.
Ramco Innovations www.optex-ramco.com (800) 280-6933