2-11
1
2
Installation, W
iring and Front Panel Operation for Initial Settings
Wiring
●
Wire installation method
1.
3UHVVWKHRSHQFORVHNH\RUDQJHRIWKHZLUHLQVHUWLRQSRUWIRU
LQVWDOODWLRQZLWKDSUHFLVLRQÀDWKHDGVFUHZGULYHU
2. Insert the wire from the wire insertion port while pressing the
RSHQFORVHNH\,QVHUWWKHZLUHXQWLOWKHWLSUHDFKHVWKHERWWRP
3.
5HOHDVHWKHRSHQFORVHNH\WRFRPSOHWHZLULQJ3XOOJHQWO\WR
make sure it does not come loose.
●
Wire with ferrule installation method
1. Insert the wire with the ferrule attached through the wire insertion
port. Insert the ferrule until the tip of the ferrule reaches the bottom.
,QWKHFDVHRIIHUUXOHLWFDQEHLQVHUWHGZLWKRXWSUHVVLQJWKHRSHQ
FORVHNH\
2. Insert it until it reaches the bottom and the wiring is complete. Pull
gently to make sure it does not come loose
●
Wire insertion slot shape
%HIRUHLQVHUWLQJDZLUHRUIHUUXOHFKHFNWKHVKDSHRIWKHZLUHLQVHUWLRQSRUWEHORZDQGWKHGLDPHWHUDQG
orientation of the wire or ferrule.
Inserting a wire or ferrule larger than the wire insertion port shown below may damage the terminal block.
Power terminal block
Device terminal block
(
for UR-ES16DT)
Wire insertion slot shape
1.75mm
2.15mm
Wire insertion slot shape
1.6mm
2.4mm
Wire removal
1.
3UHVVWKHRSHQFORVHNH\RUDQJHRIWKHZLUHLQVHUWLRQSRUWWREH
UHPRYHGZLWKDSUHFLVLRQÀDWKHDGVFUHZGULYHU
2.
3XOORXWWKHZLUHZKLOHKROGLQJGRZQWKHRSHQFORVHNH\
* If the ferrule is stuck inside the terminal block and cannot be removed,
the terminal block may be damaged by forceful removal. If the ferrule
is stuck, move the ferrule up, down, left, or right while pressing in the
RSHQFORVHNH\WRUHPRYHWKHVWXFNSDUWDQGWKHQSXOOLWRXW
* For device terminal blocks,
insert in the same way.
* For device terminal blocks,
insert in the same way.
Power terminal block
Power terminal block
Power terminal block
* For device terminal blocks, pull
out in the same way.
Ramco Innovations www.optex-ramco.com (800) 280-6933