3
www.fastTT.bike
FastTT Cervelo S5 Adapter Kit Installation Guide
Once you have decided on the correct angle for your setup, unbolt the bars. Tighten the M6
locking bolts to 12-13Nm torque.
(NOTE: Before final tightening ensure that the top and
bottom blocks are properly aligned and fitting snugly. This can be checked by slightly twisting
the blocks side to side. Any play indicates that the blocks are not properly aligned).
The M6
locking bolts MUST ALWAYS be installed with the supplied washer.
You are now ready to install the aero bars. Please reference the appropriate aero bar and
adjustable riser installation guides on our website, as follows:
