Edition 1.1 pg.4
3. Configuration
All the settings are configured on 1 web page.
3.1 Logging In
Navigate to the address of the Wizard and enter the default Username and Password. Both are
admin.
Change the language if desired.
You will see the configuration menu on the left.
3.2 Status
An overview of the default values of what you will have to configure is given here. Nothing can be
edited in this page itself.
A preview of the camera is also shown here.
3.3 Date and Time
Within Europe, you generally do not need to change anything here. The date and time can be
entered manually here.
However, it is better to use the default NTP server.
3.4 SIP Connection Settings
Screen name: enter a logical name for the device. The device’s location is useful when you have
multiple door intercoms in 1 project.
The telephone number is the number of the door intercom on the external SIP server. Authentication
ID and Password must match those given in the SIP server.
Server address and server port: enter the data for the external SIP server with which the door
intercom is to be integrated.
Detect DTMF: for maximum compatibility, leave all these check-marked.
Maximum conversation duration: enter the maximum time in seconds that a conversation may/can
last.
Stop DTMF conversation: this code forces the conversation to end.
Echo suppression options: it is best to leave this unchanged.
Click apply to confirm the changes.
