Edition 1.1 pg.3
1. Connection Diagram
The best way to power the Wizard IP is over a PoE network connection. If the available network
switch does not have a PoE, it is recommended to order the Fasttel PoE injector (FTPoE).
The Wizard IP without access control keypad can only be powered by PoE.
Pin 1: GND Wiegand/external button
Pin 2: Wiegand D1
Pin 3: Wiegand D0
Pin 4: external button
Pin 5: normally closed contact relay 2
Pin 6: normally open contact relay 2
Pin 7: shared contact relay 2
Pin 8: normally closed contact relay 1
Pin 9: normally open contact relay 1
Pin 10: shared contact relay 1
Pin 11: GND Power
Pin 12: Ext power +24V (only in keypad version)
2. Find the Wizard in the Network
1.
Via DHCP server:
During start-up, the IP address obtained is shown in the Wizard’s display.
Or search for the device using the “Advanced IP scanner”
(http://www.advanced-ip-
scanner.com/)
program (or similar software). The name is always formatted as
Fasttel0005510xxxx. Then navigate to the IP address in a browser and make the
configuration. The Mac address always begins as 00:05:51:0B.
2.
Without DHCP server:
Connect the Wizard through a PoE injector to a laptop or desktop and search for the device
using the “Advanced IP Scanner” program (or similar software). The name is always
formatted as Fasttel0005510xxxx. Then navigate to the IP address in a browser and make the
configuration.
1 2 3 4 5 6 7 8 9 10 11 12
