manualshive.com logo in svg

FASTRON. FTM1 Series, User Manual

Share
Download
FASTRON. FTM1 Series User Manual Download Page 7

   

- 7 - 

⚫

 

  Please pack the products strictly and transport them by vehicle. More closed boxes must be 

used for long-distance transportation. 

⚫

 

  It is strictly forbidden to transport the product together with equipment or goods that may 

affect or damage the product. 

Warning

 

⚫

 

  Be sure to use professional loading and unloading equipment to handle large or heavy 

equipment and products. 

⚫

 

  When carrying the product by hand, please be sure to hold the product shell firmly to avoid 

the product parts falling down, otherwise there is a risk of injury! 

⚫

 

  When handling the product, please be sure to lift and put it gently. Pay attention to the objects 

under your feet at any time to prevent tripping or falling, otherwise there is a risk of injury or 

product damage! 

⚫

 

  When the equipment is lifted by lifting tools, it is forbidden to stand or stay under the 

equipment. 

  Installation

 

Warning

 

⚫

 

  Please read the product manual and safety precautions carefully before installation! 

⚫

 

  Do not refit this product!

 

 

⚫

 

  It is forbidden to screw the fixed bolts and red marked bolts of product parts and components! 

⚫

 

  Please do not install this product in the place with strong electric field or strong 

electromagnetic wave interference! 

⚫

 

  When the product is installed in the cabinet or terminal equipment, the cabinet or terminal 

equipment shall be provided with corresponding protective devices such as fireproof enclosure, 

electrical protective shell and mechanical protective shell, and the protection grade shall meet 

the requirements of relevant IEC standards and local laws and regulations. 

Danger

 

FTM1 TYPE SCR power controller

Summary of Contents for FTM1 Series






































Reviews:

No comments

Brands by name

Popular brands

Load more brands