manualshive.com logo in svg

FASTRON. FTM1 Series, User Manual

Share
Download
FASTRON. FTM1 Series User Manual Download Page 6

   

- 6 - 

Safety precautions 

  Open package acceptance 

Caution

 

⚫

 

  Before unpacking, please check whether the outer package of the product is in good condition, 

whether it is damaged, soaked, damped, deformed, etc. 

⚫

 

  Please open the package according to the order of layers. Do not knock it violently! 

⚫

 

  When unpacking, please check the surface of the product and its accessories for damage, 

corrosion, bumping, etc. 

⚫

 

  After unpacking, please check whether the quantity and data of products and accessories are 

complete according to the packing list. 

 

Warning

 

⚫

 

  When unpacking, the product and its accessories are found damaged, rusted and used. Please 

do not install it! 

⚫

 

  Please do not install the product when it is found that there is water in the product, parts are 

missing or damaged when unpacking! 

⚫

 

  Please check the packing list carefully. If the packing list does not match the product name, 

please do not install it! 

  Storage and transportation 

Caution

 

⚫

 

  Please store and transport the products according to the storage and transportation conditions. 

The storage temperature and humidity meet the requirements. 

⚫

 

  Avoid storage in places such as water splashing, direct sunlight, strong electric field, strong 

magnetic field and strong vibration. 

⚫

 

  Avoid storing the product for more than 3 months. If the storage time is too long, please take 

more strict protection and necessary inspection. 

FTM1 TYPE SCR power controller

Summary of Contents for FTM1 Series






































Reviews:

No comments

Brands by name

Popular brands

Load more brands