Fastrax IV, Instruction Manual, Page: 87 / 92

81
2.2 CEILING MOUNT KIT
1. Select a suitable mounting location
and verify there is sufficient cable to
connect with cables from the housing.
2. Mark and drill mounting holes in the
surface using the ceiling mount flange.
3. Pull out cables required to connect
to the dome camera from the ceiling.
4. Attach the ceiling mount bracket
using screws routing cables through
the locking nut.
5. Tighten the housing with the pipe
using the socket after routing cables
through the pipe.
6. Attach the housing's safety wire to
the ceiling mount's M6x35 tapping
screw.
7. After connecting cables, fix the pipe
to the ceiling mount using the locking
nut.b
8. Tighten set screws of the socket and
locking nut with the supplied wrench.
*
Please refer to Parts List