37
ERASE PROGRAMMED DATA
Erase all stored data from the Flash-ROM of the selected dome camera. You will be
asked to enter ON or OFF. If you desire to erase all data then select the Erase Run,
otherwise press the
ESC
key to exit without erasing. The erased data includes all
stored data (auto scan
, presets, and tours….) except origin offset.
The offset value is still valid after all data is erased. The offset value can be zero with
default set of Offset origin menu.
PRESET FOCUS DEFAULT
This menu set the default mode of the focus when you save the preset.
FOCUS
: AUTO/MANUAL/ONE PUSH
ERASE PROGRAMMED DATA
AUTO SCAN : ON
PRESET : ON
TOUR : ON
PATTERN : ON
ALARM : ON
AREA TITLE : ON
PRIVACY ZONE : ON
CAMERA : ON
DOME SETUP : ON
ERASE
SAVE AND EXIT(ESC TO CANCEL)
PRESET FOCUS DEFAULT
FOCUS : AUTO
SAVE AND EXIT(ESC TO CANCEL)