16
9. Select Save and Exit by pushing the Joystick to the right. Press ESC to exit the Preset
menu without saving.
NOTE: Press the HOME key at programmed preset position(*) to delete a programmed preset
view.
The position, which is marked with
*
, already has the preset view assigned. To review the
stored preset, press
PRST
key on the
*，
The camera will show the stored preset scene.
Hold down the
CTRL
key while selecting the desired scene using the
Joystick
. Current
position will be displayed. Release
CTRL
key to complete. Or Press
IRIS Open
then the
―CTRL‖ displays. Move the desired position and the zoom position. Press
IRIS Close
then
the
―CTRL‖ disappears. Select Exit and push the
Joystick
to the right. Follow steps above
to save the preset.
3.6 Shortcut of Preset Program
After selecting the desired scene, press No. (
1
to
240
), and press
CTRL
and
PRST
subsequently. The current view will be stored to the selected preset number if the preset
number is empty. If selected preset number is no
t empty, ―
OVER WRITE
‖ message will be
displayed on the monitor and select the
―OK‖ and push the
Joystick
to the right to overwrite.
Example
:
1 , 0 , 1
+
CTRL
+
PRST
will store current view as preset No.
101
. In this case,
focus will be programmed as Auto, dwell time will be set to 3 second, and the current AE
mode will be programmed.
3.7 Tour
(SHORTCUT:
TOUR
)
There are 8 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns,
Scans or other Tours (second-level). Using second-level tours, it can be expanded to over
300 functions in a single tour.
PRESET AREA SETUP
(CTRL KEY)
NUMBER 001
PAN TILT
000.0 000.0
EXIT(ESC TO EXIT)