52
8VTAV User’s Manual
TX, RX Inverting enable
This item allows you to enable the TX, RX inverring which depends on
different H/W requirement. This field is not recommanded to change its
default setting for avoiding any reeor in your system.
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical
parallel
(printer) port.
The choice: 378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Disabled.
Onboard Parallel Mode
Select an operating mode for the onboard parallel (printer) port. Normal
EPP (Extended Parallel Port) ECP (Extended Capabilities Port) CEP+EPP
PC AT parallel port Bidirectional port Fast, buffered port Fast, buffered,
bidirectional port.
Select Normal unless you are certain your hardware and software both
support EPP or ECP mode.
The choices : SPP, ECP/EPP, ECP, EPP/SPP.
ECP Mode Use DMA
Select a DMA channel for the port.
The choices : 3, 1.
Parallel Port EPP Type
Select EPP port type 1.7 or 1.9.
The choices : EPP1.7, EPP1.9
