11
8VTAV User’s Manual
Note
: When you open the jumper, attach the plastic jumper cap to one of
the pins so you won't lose it.
Warning
: Always completely disconnect the power cord from your board
whenever you are working on it. Do not make connections while the power
is on because sensitive electronic components can be damaged by the
sudden rush of power.
Always ground yourself to remove any static charge before touching the
board. Modem electronic devices are very sensitive to static electric
charges. Use a grounding wrist strap at all times. Place all electronic com-
ponents on a static-dissipative surface or in a static-shielded bag when
they are not in the chassis.
Clear CMOS:(JP3)
To clear the data stored in the CMOS, always turn off the computer first,
then remove this jumper to 2-3 pin to clear the CMOS. The jumper should
be set to 1-2 pin (3V battery back up) before turn on the computer.
123
123
DIMM1
DIMM3
DIMM2
LPT1
COM1
COM2
USB
PS/2
A
TX POWER
FDC
IDE1
IDE2
FAN2
PCI1
PCI4
PCI3
PCI2
PCI5
AGP4X
IR1
AMR
WOL1
JP3
1
GAME/AUDIO
USB2
ISA1
CD1
CD2
JP7
FAN3
JP1
JP4
SOCKET 462
States
JP3
1
2
Clear CMOS
Normal
[Default]
* Clear CMOS must be turn off the AC power first.
