manualshive.com logo in svg

Fastfame 8VTAV, User Manual

Share
Download
Fastfame 8VTAV User Manual Download Page 44

44

8VTAV User’s Manual

Wake Up Events

VGA

When set to On (default), any event occurring at a VGA port will awaken a
system which has been powered down.
The Choice: ON,OFF.

LPT & COM

When set to LPT/COM(default), any event occurring at a COM(serial)/LPT
(printer) port will awaken a system which has been powered down.
The Choice: LPT/COM,NONE,LPT,COM.

HDD & FDD

When set to On (default), any event occurring at a hard or floppy drive
port will awaken a system which has been powered down.
The Choice: ON,OFF.

PCI Master

When set to On (default), any event occurring at will awaken a system
which has been powered down.The Choice: ON,OFF.

Wake Up on LAN/Ring

When set to Enabled, any event occurring to the Modem Ring will awaken
a system which has been powered down.
The Choice: Enabled, Disabled.

RTC Alarm Resume

When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode
The choice: Enabled, Disabled.

Summary of Contents for 8VTAV

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands