Fastfame 8VTAV User Manual Download Page 1

Copyright 2000 Publishing. All Rights Reserved.

This manual, software and firmware described in it are copyrighted by their respective owners

and protected under the laws of the Universal Copyright Convention. You may not reproduce,

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, biological, molecular, manual,

or otherwise, any part of this publication without the express written permission of the publisher.

All products and trade names described within are mentioned for identification purpose only.

No affiliation with or endorsement of the manufacturer is made or implied. Product names and

brands appearing in this manual are registered trademarks of their respective companies.

The information published herein has been checked for accuracy as of publishing time. No

representation or warranties regarding the fitness of this document for any use are made or

implied by the publisher. We reserve the right to revise this document or make changes in the

specifications of the product described therein at any time without notice and without obligation

to notify any person of such revision or change.

Printed in Taiwan.

User Manual V1.0

Summary of Contents for 8VTAV

































































Reviews: