8
P08
Set the maximum vehicle speed. This parameter can be set between «0 and 100».
Note that if «100» is selected, this will remove the speed limit on the kick scooter.
P09
Startup method. Two choices are available (0 and 1):
- «0»: Starting with the speed control handle
- «1»: Starting during manual acceleration with the legs
P10
Enable/Disable cruise mode. Two choices are available (0 and 1):
- «0»: Cruise mode disabled
- «1»: Cruise mode activated
P16
Reset Odometer - Cumulative travelled mileage (ODO):
Press and hold the button «
+
» or «
-
» for more than 5 seconds to reset the odometer's
cumulative travelled mileage.
4. List of failure codes
If there is a problem with the operation of the vehicle, the odometer will display a failure
code when the kick scooter is turned on.
Failure code
Description
E002
Brake problem
E006
Battery voltage too low
E007
Engine problem
E008
Speed control problem
E009
Controller problem
E010
Receiving communication problem from the controller
E011
Receiving communication problem from the display
