11
1
1
0
2
ON/OFF SWITCH – cont’d
Fig. 7
Fig. 6
SPEED CONTROL WHEEL
The speed of the tool can be adjusted to run the
tool at speeds varying between 1
1
,000 OPM
and 2
1
,000 OPM by rotating the speed control
wheel (1) located toward the rear of the tool
housing (Fig. 7).
1.
To increase the speed, rotate the speed
control wheel to the right.
2.
To decrease the speed, rotate the speed
control wheel to the left.
NOTE:
Speed #1 is the lowest speed. “MAX” is
the highest speed.
The optimal speed setting will vary depending
upon the type of accessory being used, the
surface being worked and the complexity of the
project. For general recommendations, see the
chart on the following page.
ASSEMBLY AND OPERATING
1
1
Project
Accessory
Speed
Balsa wood
Wood blade
Low
Drywall
Half moon
blade
Maximum
Restoring
windows
Half moon
blade
Medium
Door jamb
Steel/Wood
blade
Maximum
Door casing
Steel/Wood
blade
Med / max
Wood
dowels
Steel/Wood
blade
Maximum
Floor vent
Steel/Wood
blade
Med / max
PVC pipe
Steel/Wood
blade
Medium
Glued
flooring
Scraper
Medium
Sanding
Sander
Med / max
