12
4) CREATE SELECTION -
Create up to eighteen brand new selections, with 1-4 bins per product
display.
Display
Programming Instructions
4) CREATE SELECTION
* = Next
Menu
# = Yes
a) Press the #=Yes key to enter create
selection menu.
Enter Selection
#_ _
*=Exit
b) Enter the selection number you wish to
create.
Enter Selection #A1
Create? *=No
#=Yes
c) Press the #=Yes key to enter the selection
number.
A1 Price: $0.00
*=Abort
#=Enter
d) Type in the price and press the enter key.
A1 Price: $1.50
Accept? *=No
#=Yes
e) Press the #=Yes key to enter the price.
A1 Height: 1 inch (1-4 inches)
*=Next
#=Accept
f) Press the *=Next key until you have selected
the height of product, press #=Accept key. If
you have selected proper height the robot will
leave one product at bottom of bin for route
driver to match products when filling.
A1 Height: 2 inches
Accept? *=No
#=Yes
g) Press the #=Yes key to enter the product’s
Height
A1 Program Bin #1
*=Abort
#=Enter
h) Press the #=Enter key to create a bin for the
selection number.
A1 Move Robot
*=Cancel
#=Accept
Using inside service keypad, move robot over center
of product selected. Press the back button first.
Holding down to accelerate; pulse your finger on
button to move in 1/16” increments. Move robot right
then drop picker head to verify that it is centered
over the bin. Be sure to center on the actual product
not the packaging. If the item is a stick item, center
on the product, do not include the stick. Press
#=Accept key on customer keypad to store location.
1 Bin Height: Short (Tall)
*=Next
#=Accept
j) Press the *=Next key to see Bin Heights.
Press the #=Accept key to enter Bin Height.
A1 More Bins?
* =No
#=Yes
k) Press the *=No key if only one bin is being
programmed. The programming for that
selection is complete. Simply repeat this
process with another selection number. Press
the #=Yes key if two or more bins are needed
for that selection number. A total of four bins
per one selection number are available.
A1 Program Bin #2?
*=Abort
#=Enter
l) Press the #=Enter key to program a second
bin for the selection number.
A1 Move Robot
*=Cancel
#=Accept
m) Move the robot to the second bin. Press the
#=Accept key to enter second bin location.
A1 Bin Height: Tall (Short)
*=Next
#=Accept
n) Look inside freezer and verify if the bin is tall
or short. Press #=Accept to enter bin height.
Program Bin 3?
*=No #=Yes
o) Enter selection.
