www.maping.com
rev. d5 Elite Multilang
© 2003 Maping Co
•
Use only Fastbind Hot-Melt adhesives for binding.
Caution: using
other than Fastbind adhesives will invalidate the warranty and the
manufacturer is not responsible for any damage caused.
•
Add only new, clean and dry hot melt glue to reservoir.
Collecting
accidentally dropped glue granulates from dirty oor for instance can
block glue applicator and requires expensive service work.
•
Do not re-use hotmelt drops from the drop collector tray. These
contain impurities that can block the applicator!
From binding
quality perspectivem, chemical properties of the recycled glue are
inferior.
•
All of the machine covers, panels and safety labels must be in place
when operating the machine.
•
Machine needs to warm up properly before it is ready to use (20
min).
Moving adhesive applicator before adhesive has completely
liqueed will damage the machine.
•
Do not attempt to alter or modify the machine. It contains high-
voltage components and unexpected faults or electric shock might
occur. Modication will invalidate the warranty.
•
Turn the machine off when you have nished working with it
.
Even if the machine has unlimited continuous working time, leaving it
on and idle degrades hot melt glue slowly. This can lead to adhesive
‘overcooking’, which blocks the applicator. External timer available as
an external accesory.
•
Use only original Fastbind accessories and spare parts approved by the
manufacturer to ensure that the unit can be operated safely. For service
and maintenance, contact Fastbind authorized service outlet.
Operating Machine
Adhesive Applicator
!
!
170 ºC
!
SAFETY
!
!
N O
glue
recycling
MAX. LEVEL
DO NOT OVERFILL!
MELTED GLUE
IS HOT !
MIN. LEVEL
•
Keep the glue reservoir cap on except when adding hot-melt adhesive.
Foreign objects or substances in the adhesive reservoir can seriously
damage applicator.
•
Hot-melt glue and parts within the cover of the adhesive applicator
are hot and can cause skin burns. Let the machine cool down properly
before touching this area.
In case of burns:
• Immediately cool affected skin areas using cold, clean water.
• Do not forcefully remove hot melt material from the skin.
• Seek medical attention immediately.
•
Glue roller under adhesive applicator is high precision part and designed
for paper contact only. Foreign objects such as paper clips or staples
damage roller easily. Do not try to rotate the roller by force.
Roughener
•
Roughener is intended for clean paper only. Using roughner on warm
(soft) glue will block the rollers.
1 - 5