REV. d5 Elite Multilang
© 2004 Maping Co
www.maping.com
b)
a)
a)
8.1.1
8.1.2
Before you begin, ensure that
• Τ
here is glue in the applicator reservoir (Fastbind Hot-Melt )
•
Machine has warmed up at least
20 min.
•
Softcover nipping plate is attached (marked with “S”)
• Τ
he turntable is in normal position
• Τ
he paper guide is in place (S or H-model)
PREPARATIONS:
a.
Fold A4 or letter size silicon release paper sharply along the long
side so that the folding line divides the paper in approximately
ratio 30 : 70%. The width of the silicon paper should be larger than
binding width. If spine pressing is preferred, the paper should be
so long that it comes on the top of the nipping tool.
Place the papers that make the book between the turntable
and clamp.
a, b) Adjust papers from side and top carefully to ensure
that it aligns correctly with the cover.
Open the clamp and place the folded silicon paper on
positioning deck. It slides in easily when inserted from
below
a) Note the length of the silicon paper. It extends on the
top of the nipping tool. This prevents silicon paper
being crumpled when nipping tool moves.
8.1. LOADING PAPERS
Section 8
BINDING A SCRATCH PAD (BOOK WITHOUT COVER)
Check List & Preparations
Binding Procedure
BINDING A SCRATCH PAD (BOOK WITHOUT COVER)
1 - 20