Heat recovery unit with cooling circuit -
RCF
-
0208-6180549-rev. 02
25
GB
Controls manual
Use of the control device
Standards
The product complies with the following
European Union Directives:
• EU Directive 73/23/EEC and subsequent
amendments
• EU Directive 89/336/EEC and subsequent
amendments and is compliant with the fol-
lowing harmonized standards:
• LOW VOLTAGE: EN60730
• EMISSIONS: EN50081-1 (EN55022)
• IMMUNITY: EN50082-2 (IEC 1000-4-
2/3/4/5)
To ensure safety, the controller must be
installed and operated in accordance with
the instructions supplied, and access to
high voltage components must be preven-
ted under regular operating conditions. The
device shall be properly protected against
water and dust and shall be accessible by
using a tool only. The device is suitable for
incorporation in a household appliance and/
or similar air conditioning device.
According to the reference regulations, it is
classified:
• In terms of construction, as an automatic
electronic control device to be incorporated
with independent assembly or integrated;
• In terms of automatic operating featu-
res, as a type 1 action control device, with
reference to manufacturing tolerances and
drifts;
• As a class 2 device in relation to protec-
tion against electrical shock;
• As a class A device in relation to software
structure and class.
Forbidden use
Any use other than the permitted use is
forbidden.
Please note that relay contacts supplied are
functional and are subject to fault (in that
they are controlled by an electronic compo-
nent and be shorted or remain open); pro-
tection devices recommended by product
standards or suggested by common sense in
response to evident safety requirements shall
be implemented outside of the instrument.
Responsabilities and residual risk
Fast SpA shall not be liable for any damages
deriving from:
• installation/use other than that prescri-
bed which does not comply with the safety
standards specified in the regulations and/or
those given herein;
• use on equipment that does not guarantee
adequate protection against electric shock,
water or dust when assembled.
• use on equipment that allows dangerous
parts to be accessed without the use of
tools;
• installation/use on equipment that is not
compliant with the standards and regula-
tions in force.
Summary of Contents for RCF Series
Page 2: ......
Page 26: ...NOTES...
