Fast 9553P, Owner'S Manual

Page: 43 / 87

CONTROLS
CONTROLS 3PT Sprayer 9553P / 9573P Page 43
to raise the tip of the boom to clear
obstructions.
B. Boom Up/Down : This spring-loaded-
to-neutral-center toggle switch
controls the boom height cylinder.
Move the switch up and hold to raise
the entire boom assembly. Move the
switch down and hold to move it
down. Release the switch, the boom
will stop and remain at that position.
C. Right Boom Tilt Position : This
spring-loaded-to-neutral-center
toggle switch controls the right boom
tilt function. Move the switch up and
hold to raise the tip of the right boom
and down to lower. Release the
switch, the right boom will stop
moving and it will remain in position.
Use this function to raise the tip of the
boom to clear obstructions.
D. Main Wing Switch : This spring-
loaded-to-neutral-center toggle
switch controls the field-to-transport
function. Move the switch up and hold
to pivot the outer boom to transport,
and down to field position. Release
the switch, the flip wing will stop and
remain at that position.
IMPORTANT: Extend the cylinder
completely when folding the outer
boom to allow the boom to rotate until
it hits the stop.
E. Flip Wing Switch : This spring-
loaded-to-neutral-center toggle
switch controls the flip wing fold
function. Move the switch up and hold
to fold the flip wing in and down to fold
out. Release the switch, the flip wing
will stop and remain at that position.
F. Breakaway Wing Switch (80’-100’
only)
: This spring-loaded-to-neutral-
center toggle switch controls the
breakaway wing’s folding functions.
Move and hold the switch up to fold in
for transport and down to fold out to
field position.