PREPARING THE MACHINE
PREPARING THE MACHINE
3PT Applicator 813P / 833P
Page 31
PREPARING THE MACHINE
Use the Tractor Operator’s Manual
Always refer to tractor operator's manual for specific detailed information regarding operation of
equipment.
Break-In
After
1 hour
of operation:
1.
Tighten all wheel lugs.
2.
Tighten all other fasteners and hardware to their required torque.
3.
Check that no chemical or hydraulic lines are being pinched or crimped. Re-route as
required.
4.
Check that all coulters, nozzles, and placement components are clean and working
properly. Clean as required.
5.
Lubricate all grease fittings.
After
5 hours
of operation:
1.
Tighten all wheel lugs.
After
10 hours
of operation:
1.
Tighten all fasteners and hardware to their required torque.
2.
Check chemical and hydraulic line routings.
3.
Check that all placement components are clean and working properly.
After
50 hours
of operation:
1.
Tighten all wheel lugs.
2.
Then follow the normal servicing and maintenance schedule in
