FAST AG Solutions Fast Sprayers 9500 Series, Operator'S Manual

Page: 76 / 104

5.2.4 WHEEL TREAD
The sprayer is designed with an
adjustable axle that allows
setting at 62, 80,88 and 120 inch
wheel tread. Set appropriately
for your application. When
changing the wheel tread, follow
this procedure:
1. Clear the area of bystand-
ers, especially small chil-
dren, before starting.
2. Place all controls in neutral,
stop engine, set park brake,
remove ignition key and wait
for all moving parts to stop
before dismounting.
3. Place a jack with appropriate
capacity under the axle and
raise until the tire clears the
ground.
4. Loosen the 2 anchor bolts
through the axle.
5. Slide the wheel/axle assem-
bly to its new position.
6. Tighten anchor bolts to their
specified torque.
7. Lower and remove jack.
8. Repeat on the other axle.
71
Fig. 70 AXLE ANCHOR BOLTS
Outside of frame rail bolts (typical of other side)
9500 / 9600 Series