FAST AG Solutions Fast Sprayers 9500 Series, Operator'S Manual

Page: 41 / 104

36
1. Wear rubber gloves, eye protection and
protective clothing whenever handling
chemicals.
2. Do not breathe vapor or ingest chemicals
and avoid contact with exposed skin.
3. Follow chemical manufacturers' instruc-
tions.
DANGER
WARNING
1. Do not burn chemical containers as toxic
fumes could contaminate the area.
2. Do not discard chemical containers in
ditches.
3. Do not place containers in landfills.
4. Dispose at nearest container disposal site.
iii. Open Valve A then valve B under the
eductor tank line, to draw the chemi-
cal into the system.
iv. Close Valve B then A, when the
eductor tank is empty.
v. Triple rinse each chemical container
when empty.
vi. Repeat with the next container until
all the chemical has been added.
vii. Discard used containers at your
nearest container disposal site.
viii. Triple rinse the eductor tank and draw
into the main tank using valve A.
e. While the tank is filling, add the chemical.
i. Start the sprayer pump for agitation.
ii. Add the chemical through the top lid,
the eductor tank on the water supply
vehicle or the optional eductor tank
on the frame.
IMPORTANT
The sprayer pump must
be running to circulate the
solution in the system
and provide agitation.
Fig. 25 EDUCTOR TANK
Tank
Valves
a
b
b
A