14.5
Manoeuvres to fold the crane "C" into the rest condition
(only for the crane version “C”)
(!) IT IS FORBIDDEN TO OPERATE FROM (!)
THE DOUBLE CONTROL SIDE
(!) Operate from ground control distributor side (!)
By operating the corresponding levers:
-
completely reenter the extension boom sections;
-
lift the inner boom close to its stroke end;
-
fold the outer boom to its stroke end;
-
lower the inner boom until the hook of the safety device rests on the extension
boom sections;
-
extend the extension boom sections until the hook is correctly positioned to be attached;
-
do not insist on the control!
-
rotate the crane until the reference arrows coincide (on the column and on the base);
-
fold the inner boom to its stroke end; the rest locating pin locates into its seat;
-
re-position the outriggers to within the overall vehicle width as described on
Paragraph 13.
14.5
CONTROLS TO
OPERATE THE CRANE
GR2_3_4
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com