Serial #
FASS
Recommended Application
T D08 095G
Cummins 1998.5-2004 with stock - moderate horse power modifications
T D08 150G
Cummins 1998.5-2004 with moderate - extreme horsepower modifications
Note: If the truck has been retrofitted with an in-tank fuel pump, you must use a suction tube kit or
return this kit in its new unused condition for a T D07 095G.
Due to the increase of fuel flow you may encounter a problem with the stock fuel module. Adding a
FASS suction tube kit will solve that.
¡WARNINGs!
Read all instructions before starting installation of this product!
Installing the improper FASS Pump can cause
severe
engine damage.
Secure vehicle from ROLLING!
Cab and Chassis may require modifications
Consult vehicle’s manufacturers’ instructions concerning the electrical system before at-
tempting any electrical connections.
Be sure that the serial # on this installation manual matches that of the outside of the box.
Flush and clean all brass fittings and fuel line from debris.
Keep debris from entering the internals of the system during installation. Getting debris in
the water separator nipple can lock up the motor. If the motor does lock up from debris call
FASS for technical assistance.
Wear safety glasses when operating power tools such as drills and grinders or when using a
punch or chisel.
Properly secure lines to prevent chaffing.
BEFORE STARTING THE INSTALLATION PROCESS LUBRICATE THE
BED BOLT WITH WD-40 TO HELP WITH INSTALLATION
