Step 4:
Install Fuel Line
1998.5
–
2002 VP44 (Injection Pump)
D.
Disconnect factory fuel line from inlet side of the factory injection
pump, Install the DIPF-1003 fuel fitting into this inlet port.
(Note:
This is where the suction fuel line from the fuel filter enters the
injection pump.)
E.
Measure and cut fuel line. Insert PL-2003 90° Push-Lok fitting using oil. Install fitting to DIPF-1003.
Torque to 18 ft/lbs.
Note: Secure all fuel lines with cable ties. Cable ties are an economical way to prevent the
possibility of problems occurring!
The factory suction line can be capped off or removed from the truck. Make sure to drain fac-
tory filter. The openings on the filter and tank will need to be capped off to keep debris from
getting into lines or canister.
