Fasep 2000 srl
Rev. 1.6
Videotronic V548.G4: User’s Manual
15 April 2019
15
Fig. 62
7.5
How to apply the weight using ALU-SE applicator
Place the weight as in the picture 62.
Turn the wheel until reach the application
position of the weight (fig. 61).
Move the rod until reach the application
position of the weight.
Apply the weight(fig. 63).
Repeat the procedure for the other side.
.
7.6
How to use SPLIT Program
After the measurement spin
Press
<SPLIT>
to select the program.
Turn the wheel until first spoke (green position) is at 12 0' clock.
Press
<SET/OK>
to confirm.
Turn the wheel until second spoke (red position) is at 12 o’ clock
Press
<SET/OK>
to confirm the red position.
Balance the wheel applying weight on green and red positions.
Fig. 63
Fig. 64
