Fasep RASE.TOP.2248, Instruction Manual

Page: 40 / 57

USE
15
The tire changer use is composed by 4 main operations:
1. Bead Breaking
2. Smontage
3. Montage
4. Tire inflating
Fully close the turntable clamps acting on pedal 5 fig. 7
Remove the weights on the rim.
Fully deflate the tire, removing the valve.
Place the wheel as shown in fig. (11 a) and take the blade near the bead, keeping the necessary
safety distance between the rim and the bead breaker blade, so that the latter works on the tire and
not on the rim.
Pressing the pedal 3 fig 7 to activate the bead breaker and free the bead from the rim, then
release the pedal. Pressing the bead breaker pedal, the arm moves see fig 7. and it may be
dangerous (crushing danger); pay utmost attention during bead breaking.
It may be necessary to break the bead at several points to free it completely.
Repeat this ope ration on the other side of the wheel.
11 a
PNEUMATIC BEAD BREAKING
Fully close the turntable clamps acting on pedal 5 fig. 7
Remove the weights on the rim.
Fully deflate the tire, removing the valve.
Place the wheel as shown in fig. (11 b) e, through the buttons on the handle top
and take the blade
near the bead, keeping the necessary safety distance between the rim and the bead breaker blade,
so that the latter works on the tire and not on the rim.
Pressing the bottons 25 fig. 8 to active the electrical bead breaker and free the bead from the rim,
press the opposite button to release the bead breaker blade.
Pressing the bead breaker botton, the arm moves see 25 fig. 8 and it may be dangerous (crushing
danger); pay utmost attention during bead breaking.
It may be necessary to break the bead at several points to free it completely.
Repeat this ope ration on the other side of the wheel.
ELECTRICAL BEAD BREAKING
25
11 b