Fasep RASE.2247, Instruction Manual

Page: 34 / 53

STANDARD ACCESSORIES
Bead breaking blade protection;
Set of protections for self centring turntable grippers ;
Tape-a-weight removal tool ;
Grease support ring ;
WDK lever;
Rim edge protection;
Gun inflating device ;
Mounting tool head protection kit.
T
yre changers have been engineered only and exclusively to mount and demount tyres, by using
the supplied tools only and according to the instructions in this manual.
ACCESSORIES UPON REQUEST
Bead pressing arms device ;
Floor roller table ;
Tilting roller table ;
Quick change tool hub kit ;
Pneumatic wheel lift.
USE CONDITIONS
WARNING :
Any other use other than that described is to be considered improper and un-
reasonable.
The machines are equipped with an inflation system independent of the
other functions described above. Be very careful when using it (read the INFLATION
chapter).
WARNING :
It is not recommended the use of non-original tools while operating.
In the fig.6 are shown the operator positions occupied
by the operator during the various working phases
A = Bead breaking
B = Demounting and mounting
C = Inflating area
WARNING :
To stop the machine in case of emer-
gency:
Deconnect the power supply
plug;
Isolate the air feeding net, de-
connecting the shut-off valve
( quick insert fig.5 )
C
B
A
6
11