Fasel Elektronik FCU6x00 Series, Installation And Operating Manual

Page: 29 / 36

Decommissioning and disposal
Installation and Operating Manual / Version V 1.02 29
No. Fault Possible causes Troubleshooting To be carried
out by
the service engineer if the er-
ror occurs again. neer
800 Drying did not end
correctly. Drying temperature
was not reached, pro-
gram cancellation by
the user or error
Execute the drying program or
acknowledge the error. Start
the sauna program if the cabin
is damp. User
999 Internal time error Internal time error
Service engi-
neer
Table 9: Error messages
8.5 Acknowledge error message
1. Eliminate the cause of the error.
2. -Press the key for approx. 2 seconds. Message disappears.
9
Decommissioning and disposal

Do not dispose of the sauna control unit with regular garbage.

Dispose the control system in accordance with the respective country-specific
regulations.
10
General
10.1 Limitation on liability
All the specifications and directions in this manual have been prepared based on the
statutory standards and regulations, the present state of technology, as well as our
many years of knowledge and experience.
The manufacturer is not responsible for damage due to:

Non-adherence to the operating and installation instructions

Non-intended use

Unauthorised alterations

Technical changes

Use of own installation tools (only the provided installation tools are permitted)

Use of non-licensed spare and wear parts.
The actual delivery package can deviate from the given descriptions and illustrations in
case of special designs, additional orders or due to latest technical changes.