Fasel Elektronik FCU6x00 Series, Installation And Operating Manual

Page: 24 / 36

Operation
24 Installation and Operating Manual / Version V 1.02
6.4.2 Setting the timer
NOTE!
Your service engineer is not allowed to approve the timer without addi-
tional fire protection measures (e.g., cover guard above the oven) and it
may therefore be blocked (menu is not shown).
The timer starts the sauna with the active bath mode at the set start time.
1. The system time of your Smartphone/Tablet is used as the current time.
2. Press the appropriate symbol to change the time / start time.
The time setting menu opens.
3. Set the preferred start time.
4. If the start time has been set, the timer must be started by pressing the preferred
bath mode.
6.4.3 Aroma settings (optional)
The injection times for the aroma pump can be configured in the aroma settings menu.
Available settings are the interval time with inactive aroma pump in minutes, and the
aroma pump with active injection in seconds.
1. Touch one of the time fields to enable.
2. Enter the preferred time in the number field.
3. The value is saved once you press the Enter key.
4. Use the Back key to close the menu at any time without saving.
Only FCU5000-
STEAM:
Press and hold the menu symbol for the aroma pump to manually enable the aroma
pump for the duration of your keypress.
6.4.4 Coloured light settings (optional)
Make the following settings in the coloured light menu:
Symbol Description Function
Coloured light automatic
system Press briefly on the key to switch automatic mode on/off
The colours alternate automatically (red, green, blue) in this
mode.
Manual
coloured light setting
Press briefly on the key to switch the respective colour
on/off
This mode is only possible if automatic mode is deactivat-
ed.
Dim coloured light Press briefly on the key to turn coloured light dimming up or
down.
These symbols are only shown if coloured light dimming is
possible.