Fasel Elektronik FCU6x00 Series, Installation And Operating Manual

Page: 25 / 36

Operation
Installation and Operating Manual / Version V 1.02 25
6.5 Menu: Basic settings
The following entries may be shown in the basic settings menu, depending on the configuration:
Symbol Description Function
PIN setting

Opens the menu for the Pin setting

After entering the current pin, a new PIN can be entered.

You will be asked to assign a PIN when you connect for
the first time. Please make a note of this PIN. It can be
reset only on a sauna control unit with an operating ele-
ment or by a service engineer!
Info menu

Opens the info menu

This menu shows information about the control unit, con-
figuration, sensor systems and add-ons.
Service menu

Opens the service menu

This menu is used for initial operation/configuration and
can only be accessed by the service engineer.
Table 6: Menu: Basic settings
6.5.1 Info menu
The info menu is used to access all information about the control unit used. Use the key
to scroll one page forward.
The following information is shown:
1. Info: This shows the control unit's hardware and software version.
2. Configuration: This shows the control unit's basic configuration.
3. Inputs and outputs: This shows the configuration of the inputs and outputs.
4. Sensor: This shows all available sensor values (temperature/humidity).
5. Use the Back key to close the menu at any time.
6.5.2 Maximum permissible heating period
Once the bath mode has been started, the display shows the remaining heating period
instead of the heating period. The heating period can only be changed in standby mode.
EN 60335-2-53 "Special requirements for sauna heaters and infrared cabins" permits
the following maximum heating periods:
Max. heating period Description
More than 12 hours Public cabins supervised by instructed staff.
Max. 12 hours Hotels, apartment blocks, etc.
Max. 6 hours All other cabins/private households
Table 7: Maximum heating period
The control units are delivered with a maximum adjustable heating period of 6 hours.
Please contact the installer or the dealer of your sauna or infrared system if you require
a heating period of more than 6 hours.