Fasel Elektronik FCU2000 Series, Operating Manual

Page: 38 / 56

"Basic settings" menu
38 Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09










Fig. 28: "Fan settings – change mode" view (example)
5. Select one of the following lines with the or key:
– Fan ON at sauna

(
→
point 7)
– Fan ON humidity

(
→
point 11)
– Follow-up time x min

(
→
point 15)
Note!
Several modes can be selected, in which the fan is turned on.
6. Press the key. Selected line is enabled.
7. Select fan ON at sauna option. Cursor flashes on the selected line. The fan is
switching on after heat-up phase.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
8. Press the key. The selection is saved.
9. Exit the menu using the key or select the next line with the or key.
10. Press the key. Selected line is enabled.
11. Select fan ON humidity option. Cursor flashes on the selected line. The fan is
switching on after heat-up phase.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
12. Press the key. The selection is saved.
13. Exit the menu using the key or select the next line with the or key.
14. Press the key. Selected line is enabled.
15. Adjust the follow up time. Last digit flashes.
Press the key: Increase value.
Press the key: Reduce value.
Press the key: Move cursor to the left.
Press the key: Move cursor to the right.
16. Press the key. Selected value is accepted.
17. Exit the menu using the key.