Fasel Elektronik FCU2000 Series, Operating Manual

Page: 34 / 56

"Basic settings" menu
34 Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Press the key: Move cursor to the right.
Here you set the time when the timer is started. If you change the start time, the du-
ration changes automatically.
10. Press the key. The selection is saved.
11. Select the next line with the or key.
12. You can set the stop time (end) and the duration similar to the start time. If you
change the end time, the duration changes automatically.
13. Press the key. The selection is saved.
14. Select the next line with the or key.
15. Select mode. Cursor flashes.
Select the mode with the or key.
16. Press the key. The selection is saved.
17. Select the next line with the or key.
18. Select program no. Digit flashes.
Press the key: Reduce value.
Press the key: Increase value.
19. Press the key. The selection is saved.
20. Exit the menu using the key.
6.1.4 Select program (only for FCU4xxx)
Note!
For each mode there exist 8 programs which are freely adjustable. .
The program numbers are shown on the display. (These 8 freely ad-
justable programs may be locked by the service engineer.)
In this menu you can select 1 of 8 programs.
1. Press key “basic settings”. The lamp next to the key must light.
2. Press -key until the following view is shown:







Not available with FCU2000 and
FCU3000
Abb. 22: View "select program" (example)
3. Press -key
4. Select desired program with the keys or.
5. Confirm with key