Fasel Elektronik FCU2000 Series, Operating Manual

Page: 28 / 56

Operation
28 Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Key: without function
Key: Select "auto".
– "auto" is enabled. The symbol "auto" (symbol no. 10) appears in the display.
Key: Select "manual".
Key: without function
11. Press the key. The selection is saved.
12. Exit the menu using the key or select the next line with the or
key.
13. If the option "auto" is selected, the line "colour program no." is displayed. Select
"colour program no." and enable.
– "1" is displayed for "colour program no.”
Key: without function
Key: Select colour program no. 2.
– "2" is displayed for "colour program no.”
Key: Select colour program no. 1.
Key: without function
14. Press the key. The selection is saved.
15. Exit the menu using the key or select the next line with the or
key.
16. If the option "manual" is selected, the active colour lamps are displayed. With the
option "lamps", the number of colour lamps can be edited.
17. Select one or two (mixed colour) colour lights with the or key. The following
combinations are possible:
– 1 / 1 + 2 / 2 / 2 + 3 / 3 / 3 + 4 and 4
Note!
The possibility of selecting mixed colours is set in the service menu. For modifica-
tion requests, contact the installer or dealer of your sauna system.
18. Press the key. The selection is saved.
19. Exit the menu using the key. The "colour light mode" view (fig. 10) is displayed.
5.8.3 Colour light start (only for menu "Pro")
NOTE!
The "Colour light start" menu is only available for control devices with
the extension board type FCU-EXT-COLOR LIGHT or a RGB-LED con-
trol from the company Licht2000.
Here you can set the starting time for the colour light.