FAS International 480 ELE, Manual

Page: 40 / 121

15
FAS INTERNATIONAL srl
9 ADJUSTMENTS
9.1 - SOLENOIDS
Once credit has been established and the product has been selected:
1) The solenoid is energized, withdraws the piston and opens the microswitch A fig.6 releasing the
drum.
2) The motor gearbox rotates the selected drum.
3) The solenoid is de-energized and enters the first available hole.
4) The motor gearbox stops.
fig. F fig. G
9.2 -SELECTION COMPARTMENTS
The selection drums supplied in the vending machine have the compartments set as in fig.
8-9. It may be necessary to change the compartment sizes to sell different products. The number
of compartments is altered by removing or adding divider blades. The number of spaces for each
drum can be: 4,6,8,12,16,24 or 48.
When the number of dividers is changed it is necessary to adjust the sliding plates on the
righthand drum cover grate fig.7.
It is also necessary to remove or replace the plastic blocking plugs as to the width of the
compartment. The two methods for replacing the dividers are shown here under.
fig. H