Farymann Diesel 15D Series, Workshop Manual

Page: 56 / 76

III. ENGINE REPAIR
57
24. Fuel tank
Place the fuel tank on the tank brackets.
Slide both tank straps over the tank and
brackets. Do not forget to reinstall the
two tank seam protectors. Tighten the
straps.
(Figure 42)
25. Fuel leak-off and
supply line
Install banjo bolts on the fuel leak-
off/supply line at the fuel tank and fuel
injector. Remember to replace both
copper washers on each banjo bolt.
Route the fuel line as shown.
Attention: On the injector end the
thicker copper washer is located
between the injector and the end
piece of the leak-off pipe.
(Figure 43)
26. Air filter/Muffler
Using a new gasket and two new self
locking nuts, install the air filter.
Install the muffler and muffler screen.
Attention: Fit the two flat washers
each bolt. One in front and one
behind the muffler screen.
(Figure 44)