Farr 400UTV, Owner'S Manual

Page: 90 / 156

7-13
Vehicle Immersion
CAUTION
：
If your vehicle becomes immersed, major
engine damage can result if the machine is
not thoroughly inspected. Take the vehicle to
your dealer before starting the engine.
If it’s impossible to take your vehicle to a
dealer before starting it, follow the steps
outlined below.
1. Move the vehicle to dry land.
2. Check the air box. If water is present, dry
the air box and replace the filter with a
new filter.
3. Remove the spark plugs.
4. Turn the engine over several times.
5. Dry the spark plugs and reinstall them, or
install new plugs.
6. Attempt to start the engine. If necessary,
repeat the drying procedure.
7. Take the vehicle to your dealer for
service as soon as possible, whether you
succeed in starting it or not.
8. If water has been ingested into the CVT,
make sure inspect the hole without water
left inside. If it is muddy water, open the
CVT cap and wash the parts before
reassemble.
9. check the gearshift, release the water
inside. Wash it if it is necessary.
CAUTION
：
Make sure all motion parts coated with
grease after wash and reassemble.