Farr 400UTV, Owner'S Manual

Page: 31 / 156

4-8
“TRIP/ODO” button, and then push the
“TRIP/ODO” button for at least three seconds.
The trip meters can be used to estimate the
distance that can be traveled with a full tank
of fuel. This information will enable you to
plan future fuel stops.
NOTE:
Holding in the “TRIP/ODO” button and then
turning the key to “ON” switches the display
between “mph” and “km/h”.
Clock Mode
Pushing the button switches the
display between the clock mode “CLOCK”
and the hour meter mode “HOUR” in the
following order:
CLOCK→HOUR→CLOCK
To Set the Clock
1. Set into the clock mode.
2. Press the watch button for 3-5 seconds.
3. Press the
“KM/MILE” button to set the
hours.
4. Press the
“TRIP/ODO” button to set the
minutes.
5. Press the watch button for 3-5 seconds,
and then release it, the clock will begin
to work.
Fuel Gauge
The fuel gauge will indicate the fuel volume.
As the fuel is running out, the indicator will
turn green into red, Vice versa.