IR REMOTE AND
OSD OPERATION
The DVP1000 is shipped with a Infrared remote
control that allows for direct access to most
commands used to control the processor.
Adjustments can be made by either pressing the
appropriate button on the remote or by toggling
through the On-Screen-Display (OSD).
ON SCREEN DISPLAY (OSD)
Accessing the OSD
•
Press Menu button to bring up main Index.
•
Use Function Up/Down Keys until the triangle
at the top of the OSD turns yellow.
•
Use the Left/Right keys to move to the next
menu page. A list of available Functions
will appear.
•
Press Function Up/Down keys to select
an adjustment.
•
Use Value Left/Right keys to adjust.
The main menu drops away and a single
line menu appears.
•
Use the Function keys to return to the drop
down menu.
•
Press Menu at any time to cancel OSD
Note:
Unused inputs can be deactivated for simpler
operation of the processor. See the Setup
instructions for details.
6
IR REMOTE / OSD
INPUT
PICTURE
DISPLAY
PATTERNS
FORMATS
INPUTS
DVD
ASPECT
ANAMORPHIC
PROFILE
RECALL
F 1 2 3 4
STORE
1 2 3 4
Press the Function UP/Down
keys until the triangle turns
Yellow. Press the Value Left/Right
keys to cycle to the Menu tabs.
Use the Value left/Right
keys to change selection
or values.
Select
Inputs
Enter
Numbers
Adjusting levels can done by pressing the command
button then pressing the Value Up/Down keys or by
entering a three digit number (enter 040 to select a
level of 40, for example).Press RGB then 1 for direct
access to the DVI input.
Turn unit On/Offf
Navigate Menus
Adjust
Picture
