Page
10
of
43
ChickenMaster PRO User Guide
Firmware 01.14B
Revision 1.0 23/05/2022
The
Den
, 100 Fox Drive, Dandenong South. Victoria. 3175.
Phone: 0411 479 411
Main Settings Menu
SYSTEM SETTINGS
Main Settings Menu
System Settings
SET LOCAL TIME
Using the UP or DOWN buttons you can scroll the time forward or back.
A fast scroll will occur by holding down the UP or DOWN Buttons for longer than 2 seconds.
Once the correct Local Time is SET pressing the MENU/OK button enters this value and moves the user back
to the main SYSTEM SETTINGS screen.
Pressing the ESCAPE button at any time aborts all changes and returns the user back up one level in the
MENU Structure.
When Day Light Saving Starts or Ends do
NOT
adjust the LOCAL TIME on the CLOCK, use the Daylight
Saving Menu instead. (Page 12)
Sets the UTC Time Zone for your region refer page 42
Sets the Date in Day, Month and Year format (DD MMM YYYY)
Sets the Local Time in 24 Hour time format HH:MM
Sets your Longitude in Degrees 000⁰ East
or West refer page 42
Sets your Latitude in Degrees
00⁰ North or South refer page 42
Adjustment for Daylight Saving Time, + 30 Minutes, + 1Hour or No DST Adjustment
Wind Sensor Settings menu when used with a
FarmTronics FT-WS Wind Anemometer
Sets a variety of options for the External Alarm Input, Battery Voltage and numerous Strobe/Alarm Triggers
Sets the Countdown Timer Interval for the courtesy lights
Returns the Power Loss Counter to ZERO
Runs a TEST hardware procedure testing all the ChickenMaster PRO Inputs and Outputs
Restores the system default settings, Refer to Tables on pages 39, 40 & 41
Erases ALL user settings and initiates a Full Factory Reset. The Initial Boot Up procedure will initiate after the
user presses MENU/OK, Refer Quickstart Guide on page 43
Powers down and restarts the ChickenMaster PRO.
NO User Settings are lost during this process.
