22
WARNING:
!
The range lever is linked to the safety start switch. Set the range lever in the
center position before operating the starter switch key.
PTO selector lever (15)
This lever has three positions:
forward position
– engine speed PTO engaged,
centre position
– neutral,
backward position
– ground speed PTO engaged.
When moving the lever to the relevant position, always disengage the PTO clutch with lever 11.
NOTE:
Keep the PTO clutch always in engaged condition irrespective of whether the PTO is in
use or not
Gear box oil level dipstick (16)
Gear box oil filer plug (17)
Flow control valve knob (18)
When operating in draft control, the lever is used to adjust sensitivity of automatic depth control
system and when operating in position control to set the rate of raise the lower links.
Compressor engage lever
Compressor is fitted with clutch. To disengage clutch operate lever on compressor back side
downwards.
3.3.
Operator’s seat adjustments.
The operator’s seat can be adjusted as follows:
for its distance from the steering wheel
for height
for its suspension stiffness
To adjust its distance from the steering wheel,
disengage the rack from the rail by means of lever
13, slide the seat forwards or backwards to the desired position, and then release the lever to lock
the seat in position.
To adjust the seat for height
turn the knob clockwise or counterclockwise, thus lifting or lowering
the seat.
To adjust the seat for the suspension stiffness,
to
comply with the operator’s weight
(within
the range of 60 to 120 kg), turn the articulated knob to obtain the desired seat stiffness.
The seat belt should be secured to the holes situated at both seat sides.